6:00 am Pole barn

Sandy asks…
The craziest thing happened to my dad.
He was in Indonesia and doing lighting and special effects for a concert.
All these things happened including a fire in the VIP section where the fire trucks ran over anyone in their path.
Whoever went over the fence to the band would be smashed with a baseball bat.
And then one person climbed the stadium and took the mirrors and started slicing them into the air.
It killed and took heads off.
This was like in the 70′s-80′s?
Whats your story?

Turns out a relative of mine was in the Mofia.

Thomas asks…
Who are you “on the fence” about?

Muse. I enjoy some of their music, but I can’t listen to a complete album. The same goes with My Morning Jacket.

Maria asks…
Rock n Roll bands or punk bands with “good guitar” seemed absent in 2009. Did I miss something? The only suggestion I ran across was a band named “Future on the Left” and I am on the fence about that one.
Got any suggestions? No Pop Punk or Rock, please….

If it seems that way, it’s most likely because that’s exactly the way it went down, at least as far as the mainstream was concerned. This was the year of Vampire Weekend or The Ting Tings. The guitars took a most unwelcome vacation. Don’t fret unless your ears bled like mine did for much of 2009. There was some salvation.
Babyland – Cavecraft
Blank Dogs – Under and Under

Mandy asks…
I recently bought the Ryobi BS902 9″ Band Saw as a starter saw for me. I noticed when I first started using it that as I pushed the piece of wood through, the blade itself began to curve off of the straight line I had drawn. I know that it was not me making it curve, because I had the wood sliding along the fence, so I am wondering if this has happened to other people and what I can do so that this wont happen again. Thanks.

Blade tension needs to be tighter, AND you may need to adjust the blade guides.
Here’s a link showing some guides to give you an idea of what Im talking about – http://www.woodcraft.com/InhancedImage.aspx?FamilyID=904
Those guide blocks should allow the blade to slip thru them, but not allow it to twist. A wider blade will help considerably too.. Makes for a stiffer band behind the teeth (if youre currently using a 1/4″, try going to 1/2″ if you see a lot of twist). Oh, those guide blocks should be right down close to your stock too… I like to keep mine at less than an inch from the stock surface, the closer the better.
The other things to consider are teeth per inch, and the stock material (what youre actually cutting). In a manufacturing production environment, we even get down to the tooth angle, hook and set…changing those as needed for different kinds of stock. The more teeth per inch youre using, the smoother the cut will be…if you don’t need a smooth cut, then by all means use a blade with fewer teeth, and a more aggressive tooth pattern for faster ripping.
Have Fun

Richard asks…
have the small band aids so i didn’t put any band aids on im going to go get some later will this prolong the healing process if i have no band aid and how many days until it heals

Scrapes are usually shallow and heal quickly as a result. The size of the scrape dictates how long it will take to heal. The more area covered by the scrape, the longer it will take. Usually scrapes heal in 7-10 days or less.
Regarding the band-aids, although wounds kept covered do heal faster than those left uncovered, waiting a few hours or a day until you can purchase appropriate bandages will not significantly impact the scrape’s healing. Just keep it clean and try to keep it from rubbing against things until you get something to cover it with.
Powered by Yahoo! Answers